• DMP Series Bơm đa tầng – Bơm tăng áp chữa cháy
DMP Series Bơm đa tầng – Bơm tăng áp chữa cháy

Material Properties

  • Pump Casing
: GG25 (Cast Iron) – GGG40 (Sfero)
  • Impellor
: CuSn10 (Bronze) – GG25 (Cast Iron)
  • Shaft
: AISI 420 – AISI 41050
  • Sealing
: Soft Packing

Technical Properties

  • Fluid Temperature
: -20 / +80 °C
  • Power Supply
: 380 – 440 Volt, 50 Hz / 60 Hz
  • Operating Pressure
: 5 – 24 Bar
  • Flow Rate Q (GPM)
: 17.6 – 704
  • Pressure Hm (PSI)
: 70 – 197 mSS
  • Motor Speed (rpm)
: 1.450 – 2.950 d/d
  • Suction Flange
: DN 40 – DN 250
  • Discharge Flange
: DN 32 – DN 200

System Equipments

  • Case Relief Valve
  • Manometer
  • Expansion Tank
  • Air Discharge Valve
  • Check Valve
  • Jockey Pump
  • Pressure Switch
  • Pressurestat

Product Specifications

  • Used in the projects where high pressure is required.
  • Soft packing is used as a sealing element.
  • Impellors are produced with balance holes to compensate the axial loads.
  • Cylindrical roller bearings that have a long life and withstand heavy conditions are used in the pumps.
  • The pump rotates clockwise with reference to the motor side.
  • Suction and pressure flanges can be PN16, PN25, or PN40 if required.
  • Case castings can be GG25 (CAST IRON) or GG40 (SFERO) according to the desired pressure.

Performance Curves

Download

Certificates

    Liên Hệ Chúng Tôi

    KHÁM PHÁ NHỮNG GÌ CHÚNG TÔI CÓ THỂ CUNG CẤP CHO BẠN!

  • LIÊN LẠC NGAY